| Customization: | Available |
|---|---|
| Specimen: | Serum, Plasma, Whole Blood |
| Storage Temperature: | 2-30 Degree |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
INTENDED USE
The Canine Heartworm (CHW) Rapid Test Kit is a chromatographic immunoassay for the qualitative detection of canine Heartworm (CHW) Antigen in canine whole blood, serum or plasma.
PRINCIPLE
The invisible anti-CHW antibody (T line) and secondary antibody (C line) are immobilized on a nitrocellulose membrane in result window.Another anti-CHW antibody is conjugated with colloidal gold particle and immobilized on glass fiber as conjugate pad.When specimen is applied into the sample well on device, CHW antigen will bind to the gold conjugate and migrate on the surface of test strip by passive diffusion,and a visible T line will appear in result window after 10 minutes.The C line has to appear every time when the test has performed which indicates the test is performing properly.
CONTENTS
• Rapid Test
• Buffer
• Disposable pipettes
• Instruction for use
STORAGE AND STABILITY
• The kit should be stored at 2-30°C until the expiry date printed on the sealed pouch.
• The test must remain in the sealed pouch until use.
• Keep away from direct sunlight, moisture and heat.
• Do not freeze.
• Care should be taken to protect the components of the kit from contamination. Do not use if there is evidence of microbial contamination or precipitation. Biological contamination of dispensing equipment, containers or reagents can lead to false results.
SAMPLE COLLECTION AND PREPAIRATION
• The testshould be performed using canine serum or plasma.
Serum: Collect the whole blood into the collection tube (NOT containing anticoagulants such as heparin, EDTA and sodium citrate), leave to settle for 30 minutes for blood coagulation and then centrifuge to get serum supernatant. Plasma: Collect the whole blood into the anticoagulant tube (containing anticoagulants such as heparin, EDTA and sodium citrate) and then centrifuge to get plasma. Whole blood: Collect the whole blood into the anticoagulant tube. If anticoagulated whole blood is not immediately tested, they should be refrigerated at 2~8ºC and used within 24 hours.
2. If serum and plasma are not tested immediately, they should be stored at 2~8°C for 24 hours. For longer storage, freeze at -20°C or below.
3. If specimen contains precipitate, it may affect the test result. Such specimen must be clarified prior to assaying.
4. The use of hemolytic, or bacterially contaminated specimens should be avoided. Erroneous result may occur.
OPERATION
Bring tests, specimens, buffer and/or controls to room temperature (15- 30°C) before use.
1. Remove the test from its sealed pouch, and place it on a clean, level surface. Label the device with animal patient or control identification. For best results, the assay should be performed within one hour.
2. Using a dropper, add 1 drop of specimen into sample well on the test cassette.
3.Add 2 drops of assay buffer into sample well (S) vertically.
4. Wait for the colored band(s) to appear. The result should be read at 15 minutes. Do not interpret the result after 20 minutes.
INTERPRETATION OF RESULTS
POSITIVE: The presence of two lines as control line (C) andtest line(T)within the result window indicates a positive result.
NEGATIVE: The presence of only control line (C) withintheresultwindow indicates a negative result.
INVALID: If the control line (C) is not visible within the result windowafter performing the test, the result is consideredinvalid.Some causes of invalid results are because of not followingthe directions correctly or the test may havedeterioratedbeyond the expiration date. It is recommendedthatthespecimen be re-tested using a new test.
1.Are you a Manufacturer?
Yes,we are manufacturer based in Foshan,China with 100 workers,more than 5000 square meter non-dust workshop,advanced automate machines and professional R&D team ensure the high quality,speedy delivery and large production capacity.
2.Can we put our logo/text om the product or package?
Yes,we can do OEM or even ODM.All of our products can be customized.
3.Can you provide free samples?
Yes, free sample are available.
4.How long is your production time?
Our production time is usually two weeks after receiving the deposit and four weeks for one contaoner order quantity.
5.How to make the payment?
){kind=link}