Male Fertility Sperm Sp10 Rapid Test to Infertility Diagnosis

• Customization: Available
• Classification: Ivd
• Type: Rapid Test
• Model NO.: SP
• Certification: CE, MSDS, ISO13485
• Component: Rapid Test
• Specimen: Sperm
• Result Time: Within 3 Mins
• Storage: 2~30 º C
• Principle: Immunochromatography
• Shelf Life: 24 Months
• Certificate: CE
• Usage: Professional Used
• Transport Package: 100tests/Box, 40tests/Box, 1test/Box
• Specification: 1000tests/carton
• Trademark: Dewei
• Origin: China

Product Description

INTENDED USE	Male Fertility Test.
MAIN CONTENTS	• Rapid test  • Collection cup  • Semen transfer device • Buffer • Package insert
STORAGE	at 2 ~ 30 º C in the sealed pouch for 24 months.
PRINCIPLE	Chromatographic immunoassay for in vitro qualitative detection.

INTENDED USE
Sperm SP10 Rapid Test is a rapid chromatographic immunoassay for in vitro qualitative detection of acrosomal protein SP10 found in human semen to estimate sperm concentration above or below 15 million/ml. Sperm concentration can be used for assistant diagnosis and curative effect observation of male infertility, and provide guidance for reproductive planning for couples. For in vitro diagnostic use only.

MAIN CONTENTS
• Rapid test cassette with desiccant    
• Collection cup  
• Semen transfer device
• Buffer
• Package insert      
                  
STORAGE AND STABILITY
•  Store at 2 ~ 30 º C in the sealed pouch for 24 months.
•  Keep away from direct sunlight, moisture and heat.
•  DO NOT FREEZE.

OPERATION
Bring tests, specimens, buffer and/or controls to room temperature (15-30°C) before use.

1. Remove the test cassette from the foil pouch and lay it horizontally on a flat surface.

2. Collect semen sample in the collection cup provided.
3. The sample should then be allowed to stand for 60 minutes, until the semen is fully liquefied.
4. Using the semen transfer device provided, fill up to 0.1ml indicated on the device with the semen sample. The semen sample is then added to the vial of buffer provided.
5. Mix the semen sample and test solution by turning the vial upside down 5-10 times.
6. Hold the diluted specimen buffer tube upright and open the cap onto the specimen collection tube. Invert the specimen collection tube and transfer 2 full drops of the diluted specimen (approximately 80 μL) to the specimen well (S) of the test cassette, then start the timer. Avoid trapping air bubbles in the specimen well (S). See illustration.
7. Read results at 5 minutes after dispensing the specimen. Do not read results after 10 minutes.

RESULT READING

R&D TEAM

PRODUCTION LINE

EXHIBITIONS 

SHIPMENTS