Customization: | Available |
---|---|
Shelf Life: | 24 Months |
Storage Temperature: | 2-30ºC |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
INTENDED USE
The Canine Distemper Virus (CDV) Antigen Rapid Test Kit is a chromatographic immunoassay for the qualitative detection of Canine Distemper Virus antigen in canine eye, ocular or nasal secretion.
PRINCIPLE
The invisible anti-CDV antibody(T line) and secondary antibody (C line) are immobilized on a nitrocellulose membrane in result window.Another anti-CDV antibody is conjugated with colloidal gold particle and immobilized on glass fiber as conjugate pad.When specimen is applied into the sample well on device,CDV antigen will bind to the gold conjugate and migrate on the surface of test strip by passive diffusion,and a visible T line will appear in result window after 10 minutes.The C line has to appear every time when the test has performed which indicates the test is performing properly.
CONTENTS
• Rapid Test
• Buffer in Tube
• Swab
• Instruction for use
STORAGE AND STABILITY
• The kit should be stored at 2-30°C until the expiry date printed on the sealed pouch.
• The test must remain in the sealed pouch until use.
• Keep away from direct sunlight, moisture and heat.
• Do not freeze.
• Care should be taken to protect the components of the kit from contamination. Do not use if there is evidence of microbial contamination or precipitation. Biological contamination of dispensing equipment, containers or reagents can lead to false results.
PRECAUTIONS
• The test kit is for canine use only. Do not use for other animals.
• The device is sensitive to humidity and heat.Perform the test immediately after removing it from the foil pouch.
• Read the instructions carefully before operation and follow the instructions..
• Do not reuse the test components
• Do not use the test kit if the pouch is damaged or the seal is broken.
• Do not use the test kit beyond the stated expiration date marked on the label.
• Do not mix components from different lot numbers because the components in this kit have been quality control tested as standard batch unit.
• All specimens should be handled as being potentially infectious.
• Decontaminate and dispose of all specimens, used kits and potentially contaminated materials safely in accordance with national and local regulations.
SAMPLE COLLECTION AND PREPAIRATION
• Specimen of this test is canine body secretions of eye mucus (in the conjunctiva) or nasal discharge.
• The specimens should be tested immediately after collection.
• If specimens are not tested immediately, they should be stored at 2~8°C for 24 hours. For longer storage, freeze at -20°C or below.
OPERATION
Bring tests, specimens, buffer and/or controls to room temperature (15- 30°C) before use.
1. Collect canine ocular or nasal secretion using a swab,then insert the swab into the assay buffer tube.
2. Mix the swab until the specimen has been dissolved totally into the assay buffer (Appx. 10s), then squeeze the solution from the cotton swab as much as possible.
3. Discard the cotton swab and cover the tube with cap, then wait for 2 minutes.
4. Remove the test from its sealed pouch, and place it on a clean, level surface. Label the cassette device with animal patient or control identification. 5. Add 3 drops of assay buffer into the sample well on device, drop by drop vertically, and start the timer.
6. Wait for the colored band(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 15 minutes.
INTERPRETATION OF RESULTS
POSITIVE: The presence of two lines as control line (C) and test line (T) within the result window indicates a positive result.
NEGATIVE: The presence of only control line (C) withintheresultwindow indicates a negative result.
INVALID: If the control line (C) is not visible within the result windowafter performing the test, the result is consideredinvalid.Some causes of invalid results are because of not followingthe directions correctly or the test may havedeterioratedbeyond the expiration date. It is recommendedthatthespecimen be re-tested using a new test.
1.Are you a Manufacturer?
Yes,we are manufacturer based in Foshan,China with 100 workers,more than 5000 square meter non-dust workshop,advanced automate machines and professional R&D team ensure the high quality,speedy delivery and large production capacity.
2.Can we put our logo/text om the product or package?
Yes,we can do OEM or even ODM.All of our products can be customized.
3.Can you provide free samples?
Yes, free sample are available.
4.How long is your production time?
Our production time is usually two weeks after receiving the deposit and four weeks for one contaoner order quantity.
5.How to make the payment?
By T/T,L/C,Paypal,Western union and made in China is also acceptable.