| Customization: | Available |
|---|---|
| Type: | IVD Instrument |
| Specimen: | Feces |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Name | Cat# | Sample | Result Time | Method |
| Norovirus Antigen Rapid Test Kit | NOR-DF02 | Feces | 10 mins | Colloidal Gold Immunochrogamet |
Qualitative detection: They identify the presence or absence of norovirus antigens, indicating infection.
Rapid results: Results are typically available at 10 minutes, allowing for quick patient management.
Types of norovirus: Many tests detect both Genogroup I (GI) and Genogroup II (GII) noroviruses.
Outbreak management: Rapid tests are valuable for identifying and managing outbreaks due to their speed and ease of use.
Clinical significancy: Early detection and diagnosis are crucial for preventing the spread of norovirus, especially in vulnerable populations like the elderly and infants.
Rapid Test
Specimens dilution tube with buffer
Disposable pipettes
Instruction for use
1. Specimen collection and pre-treatment:
1) Use the specimen collection cards provided in the kit for specimen collection. Follow the instructions on the specimen collection card. Other clean, dry containers may also be used for specimen collection. For best results, performed the test within 6 hours after collection.
2) Unscrew and remove the dilution tube applicator. Be careful not to spill or spatter solution from the tube. Collect specimens by inserting the applicator stick into at least 3 different sites of the feces.
3) Replace the applicator back into the tube and screw the cap tightly. Be careful not to break the tip of the dilution tube.
4) Shake the specimen collection tube vigorously to mix the specimen and extraction buffer. Specimens prepared in the specimen collection tube may be stored for 6 months at -20°C if not tested within 1 hour after preparation.
2. Testing
1) Remove the test from its sealed pouch, and place it on a clean, level surface. Label the test with patient or control identification. For best results, the assay should be performed within one hour.
2) Using a piece of tissue paper, break the tip of the dilution tube. Hold the tube vertically and dispense 2 drops of solution into the specimen well (S) of the test device. Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result area.
As the test begins to work, color will migrate across the membrane.
3. Wait for the colored band(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.
Interpretation of Results
){kind=link}